G60 G80 G100 G200
YIDA LEAD
|
| |
Name：Hydroxyethyl Methyl Cellulose
Model：G60 G80 G100 G200
Exterior：White or light yellow powder
Graininess：98% pass 80 mesh
Methoxy,%：18.0-24.0
Hydroxyethyl,%：8.0-16.0
Water Content/%：≤5
pH Value：5.0-8.5
Viscosity (2%, 20℃)：40000-200000
YIDA LEAD® Hydroxyethyl Methyl Cellulose (HEMC / MHEC) is suitable for putty powder system and dry-mixed mortar system. It has excellent water retention, anti-sagging, smooth drape, increases open time, improves bonding strength, reduces deformation rate, and prevents Cracking and other properties.
Internal and external wall putty powder
Plastering mortar
Bonding mortar
Anti-cracking mortar
Tile adhesive
Insulation system mortar
Recommended Dosage
The recommended dosage of this product is 2-5‰ of the system, and the dosage needs to be determined by experiment.
Packaging And Storage
After the product is opened and used, it must be sealed in time; This product is thermoplastic, so it should be stored in a high temperature environment to avoid pressure, otherwise it will easily cause agglomeration; Sealed and stored in a cool and dry place at 0-40℃, and the storage time should not exceed 24 months.
Technical Support
In the process of preparing various formula systems for this product, the Yida technical team can provide technical consultation, technical tracking, and long-term optimization of the formula system.
Name：Hydroxyethyl Methyl Cellulose
Model：G60 G80 G100 G200
Exterior：White or light yellow powder
Graininess：98% pass 80 mesh
Methoxy,%：18.0-24.0
Hydroxyethyl,%：8.0-16.0
Water Content/%：≤5
pH Value：5.0-8.5
Viscosity (2%, 20℃)：40000-200000
YIDA LEAD® Hydroxyethyl Methyl Cellulose (HEMC / MHEC) is suitable for putty powder system and dry-mixed mortar system. It has excellent water retention, anti-sagging, smooth drape, increases open time, improves bonding strength, reduces deformation rate, and prevents Cracking and other properties.
Internal and external wall putty powder
Plastering mortar
Bonding mortar
Anti-cracking mortar
Tile adhesive
Insulation system mortar
Recommended Dosage
The recommended dosage of this product is 2-5‰ of the system, and the dosage needs to be determined by experiment.
Packaging And Storage
After the product is opened and used, it must be sealed in time; This product is thermoplastic, so it should be stored in a high temperature environment to avoid pressure, otherwise it will easily cause agglomeration; Sealed and stored in a cool and dry place at 0-40℃, and the storage time should not exceed 24 months.
Technical Support
In the process of preparing various formula systems for this product, the Yida technical team can provide technical consultation, technical tracking, and long-term optimization of the formula system.
