HPMC-YD1920S
Name Hydroxypropylmethylcellulose
Model YD1920S
Product Description
Yida Hydroxypropyl Methyl Cellulose (HPMC) YD1920S is a kind of cellulose after surface treatment, it has cold water solubility, good dispersibility, uniform dissolution and no clustering, high thickening, good suspension, no precipitation, no distinction Layer and other performance
Scope Of Application
YD1920S can be widely used in daily chemicals, such as laundry detergent, detergent, detergent and other systems
System category | Test dosage /% | status description |
1 | Thickening, good suspension, no precipitation and no stratification | |
Dish soap | 1 | Thickening, good suspension, no precipitation and no stratification |
Detergent | 1 | Thickening, good suspension, no precipitation and no stratification |
Performance
Model | YD1920S |
Exterior | White or light yellow powder |
Graininess | 98% pass 80 mesh |
Water content/% | ≤5 |
PH value | 6-8 |
Viscosity (2%, 20℃) | 160000S-200000S |
Use Characteristics
The cold water instant cellulose must be mixed with a weakly alkaline (pH 8-9) aqueous solution below 60°C and continuously stirred for more than half an hour. If the stirring time is less than half an hour and the stirring is stopped, the phenomenon of layering and reverse dilution will occur. If the pH value of the aqueous solution is neutral (the pH value is lower than 7) and the viscosity response is not timely or the viscosity is not enough, the phenomenon of layering and thinning will occur. At this time, just add it to the mixture of cellulose and water A small amount of alkaline substances can make the PH value reach 8-9, which can quickly improve the viscosity state. Instant cellulose is the surface treatment process of spraying glyoxal (acidic surface treatment agent) on each grain of cellulose, so it will prevent the occurrence of viscosity of each grain of cellulose without clumping when exposed to water.
Recommended Dosage
The recommended dosage of this product is 1-2% of the system, and the dosage needs to be determined by experiment
Packaging And Storage
After the product is opened and used, it must be sealed in time This product is thermoplastic, so it should be stored in a high temperature environment to avoid pressure, otherwise it will easily cause agglomeration Sealed and stored in a cool and dry place at 0-40℃, the storage time should not exceed 24 months
Technical Support
In the process of preparing various formula systems for this product, the Yida technical team can provide technical consultation, technical tracking, and long-term optimization of the formula system.
Shijiazhuang City, Hebei Province, China
0311-88100555
info@chinayidahpmc.com